Product material: the overall 304 stainless steel material, 304 stainless steel base (generally the manufacturer is aluminum alloy), eyewash assembly (double elbow + double nut connection, not easy to leak).
Working pressure: 0.2-0.4MPa
flow rate: shower head 120-180 liters / minute
eye wash nozzle: 12 liters / minute
Product features: soft foam water flow of the eye nozzle, compared with ordinary eye wash nozzle to improve cleaning efficiency of 50%.
Performance: Super strong acid, alkali, salt, oil and other chemical substances.
Scope of application: suitable for nuclear energy, petroleum, chemical, machinery manufacturing, automobile shipbuilding, casting, painting, printing and dyeing medicine, medical and other industries.
Optional configuration: can add pedals, can add ABS coating and lighting device, can add empty antifreeze device , can be customized according to customer requirements.
Nominal pressure Sealing pressure Working pressure
Spraying flow L/min Eyewashing flow L/min Applicable conditions 0.4MPA 0.45MPA 0.20~0.40MPA ≥75.5 ≥11.4 Normal temperature pure water or in compliance with sanitary standards Water
main material: 304 stainless steel
installation and commissioning
1 The product instruction manual and packing list must be re-examined before installation.
2. The equipment should be installed near the source of the hazard. The installation location should be within 15 meters of the accident-prone location, and the flushing position can be reached within 10 seconds of running speed.
Try to install at the same level of the source of danger, and be able to reach in a straight line quickly, avoiding missing the best ambulance time. In eyewash and emergency showers, there must be a striking sign. Workers should be familiar with the location of the surrounding equipment and be able to quickly rescue and leave the danger zone when an emergency occurs.
1. This product is used in environments above 0°C. If it is used below 0°C, it needs to be protected against freezing.
2. Before installation, please flush the inlet pipe beforehand.
3. It is recommended to install water inlet control in the inlet pipe. After the valve is used, close the inlet control valve and close the eyewash valve after the water in the main body has been drained. Before
using the method
, first open the water inlet control valve
1. When it is necessary to wash, please pull down the shower switch handle, the shower valve opens, push the shower switch handle up, the shower valve closes (the ball valve connecting rod is above the ball valve 45 ° is off, 45° is on).
2. If you need to wash your eyes, please push the eyewash switch in a clockwise direction, the eyewash valve opens, pull the push plate counterclockwise, and the eyewash valve closes. The dust cover should be reset after use.
Maintenance and Maintenance
1. Only allow emergency use when an accident occurs. It is strictly forbidden to use the bathing method in order to avoid product failure and lead to undue accidents.
2. More than one comprehensive test should be conducted every week to verify the reliability and effectiveness of the device to ensure emergency and effective use when the accident occurs. This product is not a medical device, it only serves as an emergency shower and reduces the damage of harmful substances to the human body.
3. In the event of an accident, the victim must select the shower time according to the degree of damage of the hazardous substance. Prepare emergency rescue measures during the period.
Why choose a hybrid emergency shower/spray eyewash?
The composite eye washer is mainly equipped with an emergency sprinkler. Many companies or factories require a sprinkler to wash the eyes at the same time. A product with two functions. It is very convenient and quick to carry out emergency rescue on the eyes, face, neck or arm of the worker at the same time. The composite eye washer is widely used in workplaces where chemical substances exist in the petroleum, chemical, electric power, electronics and port industries.