WJH0982 Tragbare Press-Wasch Haut & Augenwasch
1. Beweglich Augenwasch nimmt wenig Platz ein, die die meisten sichtbaren Zeichen.
2. Die Merkmale des Produkts: 1) Es kann die meisten professionellen Schutz liefern, bequem und Verknüpfung.
2) It has not special requirement of Installation, Sie kann es direkt nach den Bedürfnissen des Arbeitsplatzes verwenden.
3) Es gibt genug Platz in dem Augenwaschkopf, Sie kann es Augen und Gesicht waschen verwenden, auch können die Hände notwendig unterstützen verwenden, wenn.
4) Press-Wasch Haut Augenspülung, unschädliche Polyethylen, ausgestattet Dekompressor, der Fluss ist stabil. Sie sollten die Reinheit Wasser wechseln und fügen Gas jedem 90 Tage, hinzufügen 5kg reines Wasser und Gas, das 2.5Mpa Push 50 mal durch die Hände.
5) Es kann auf dem Gebiet der chemischen verwendet werden, Chemie-Industrie, Halbleiter, Metallurgie, Elektron, und Maschine etc., wissenschaftliches Forschungsgebiet.

tragbar Augenwasser stations are essential safety equipment for workplaces and locations where hazardous materials are present and pose a risk to the eyes. In the event of an eye injury, these devices can provide immediate access to flushing water, helping to minimize damage and promote healing. Here’s a step-by-step guide on how to use a portable eyewash station:

1. Position the • Stellen Sie ein Abflusssystem für überschüssiges Wasser bereit nearby

Make sure the Analyse verschiedener Arten von Notduschen und Augenduschen station is placed in an easily accessible location, innerhalb 10 Sekunden (grob 55 Füße) of the hazard area. It should be clearly marked and free from obstructions.

2. Inspect the eyewash station regularly

Regular inspection and maintenance are crucial to ensure the eyewash station is in proper working condition. Check for any leaks, clean and fill the unit with water or appropriate flushing solution, and replace any expired items.

3. Familiarize yourself with the eyewash station

Before an emergency occurs, make sure you and your coworkers know how to operate the eyewash station. This includes understanding how to activate the unit and how long the flushing process should last.

4. In case of an eye injury

If you or a coworker experiences an eye injury, act quickly and follow these steps:

1. Assist the injured person – Help them reach the eyewash station as quickly as possible.
2. Activate the eyewash station – Most portable units have a simple activation mechanism, like a pull handle or push paddle. Follow the manufacturer’s instructions to activate the unit.
3. Begin flushing the eyes – Have the injured person hold their eyes open and position their face so that the water streams directly into the affected eyes. Ensure they keep their eyes open during the flushing process.
4. Flush for at least 15 Protokoll – Das American National Standards Institute (ANSI) recommends flushing the eyes for a minimum of 15 minutes to remove any contaminants. In manchen Fällen, additional flushing time may be required, depending on the nature of the contaminant.
5. Suche medizinische Behandlung – After flushing, the injured person should seek immediate medical attention, even if the eye injury appears to be minor.

Merken, time is crucial when dealing with eye injuries. Using a portable eyewash station promptly and correctly can help prevent further damage and promote healing. Always follow the manufacturer’s guidelines and ensure the eyewash station is properly maintained and inspected regularly.