emergency showers or eyewash stations,Emergency Eye Wash Station

Emergency showers are designed to flush the user’s head and body. They should not be used to flush the user’s eyes because the high rate or pressure of water flow could damage the eyes in some instances. Eyewash stations are designed to flush the eye and face area only. There are combination units available that contain both features: a shower and an eyewash.

Eyewash stations should be designed to deliver fluid to both eyes simultaneously at a volume of not less than 1.5 litres/minute (0.4 gallons/minute) for 15 minutes. The combination eye and face wash stations require 11.4 litres per minute (3.0 gallons per minute). However, in either case, the volume should not be at a velocity which may injure the eyes. The unit should be between 83.8 and 134.6 cm (33 to 53 inches) from the floor, and a minimum of 15.3 cm (6 inches) from the wall or nearest obstruction.

Specifications of emergency showers or eyewash stations,Emergency Eye Wash Station

Coating: Gloss epoxy powder coating
Eye wash: Stainless steel SUS304 inlet (38mm), stay-open ball valve switch, stainless steel eye wash bowl. Eye wash bowl: 40mm diameter, stainless steel SUS304.
Eye spray head: Chemical resistant PP, built-in stainless filter for impurity clearance

color:red and yellow.or customized according to customer’s requirement