We want to use eyewash, the first thing to consider is the installation place. Many people will be troubled by the installation place. But don’t be afraid now, the eyewash manufacturer solves the troubles of the installation location for us.

According to the American standard ANSIZ358.1-2014, the eyewash equipment should be installed near the source of danger, within 10s can quickly reach the area of ​​the eyewash equipment, and should be installed on the same level as the source of danger, should avoid going up and down stairs or It is best to reach the slopes and turns in a straight line to avoid cross-level rescue. In particular, doors on site may prevent users from reaching the eyewash station.

The installation position of the eyewash should be safe first, and should not be in the position where it is most likely to be polluted in the event of toxic gas leakage, hazardous chemicals splashing or fire and explosion accidents, and then consider the production process, production operating environment, Due to factors such as space structure, equipment and devices, appropriate emergency eyewashing equipment should be installed near the potentially contaminated area. Generally speaking, the greater the danger, the closer it should be to set up, so that the contaminated personnel can be treated as soon as possible. In strong acids, strong alkalis, or toxic and harmful substances that are highly corrosive and easily absorbed by the skin, or other workplaces where the consequences of leakage are very serious, the eyewash equipment should be installed in adjacent locations as much as possible. In addition, the lighting conditions of the setting location should also be considered, so as to avoid obscurity that affects recognition, user wishes, and even potential dangers.
In the actual implementation process, setting the eyewash equipment near the exit can ensure timely evacuation in the event of an accident. In addition, the presence of special chemicals such as chlorosulfonic acid should also consider setting up emergency eyewash equipment in the “relatively safe area”. Because the chlorosulfonic acid reacted violently with water, a large amount of smoke was generated, and the rescue could not be continued. It was necessary to transfer to a safe area for further treatment. The laboratory environment requires special consideration, as many laboratories typically install emergency safety showers in hallways or walkways outside the laboratory. This may meet the stated criteria, but still not allow immediate access to emergency equipment. In these cases, eyewash manufacturers recommend installing compound eyewashes next to the laboratory sink.

After reading the explanation of the eyewash manufacturer, I believe that citizens who are going to use the eyewash should have already considered where to install it.