The lab console is available in a variety of different materials. Therefore, according to the material, they are called all-wood experimental bench, steel-wood experimental bench, all-steel experimental bench, etc., and different materials correspond to different working experimental environments. And all steel is a very commonly used type.
The quality of steel wood is largely determined by its material, and the quality of the all-steel laboratory operating table can be selected through its production material and specific experimental environment. If there is often pollution with chemical reagents in the experiment, during the experiment, the task it has to carry is very heavy, then you have to choose better quality furniture. In general, it is just that the quality of the material is much better than that of wood, and it is not easily contaminated. Now many experimental equipment and furniture will use all-steel materials, which can not only meet the needs of each experiment, but also facilitate the laboratory to maintain a new look.
The laboratory pp sink is the place used in the laboratory to clean glassware and receive water. So how is the lab pp sink installed?
1. The installation method of the counter basin is generally adopted.
2. When installing, first open a slightly smaller hole than the sink in the countertop of the laboratory operation table, so that the sink will not fall under the table, but just on the edge of the table face.
3. When the sink is installed, first apply black glass glue evenly on the edge of the hole, and then slowly put the sink down and compact it slightly. Smooth out the glue spilled from the edges to achieve unity and leak-proof results.
4. The pp sink should be equipped with an anti-siphon bottle recycler.
In addition to washing the filter box every time you clean, remember to clean the neck of the tube behind the filter box together to avoid more and more grease. The oil stains on the pool can be scrubbed with the core, or a handful of fine salt is evenly sprinkled on the surrounding pool wall, and then rinsed several times with hot water from top to bottom, and the oil can be removed. You can also sew a small pocket out of old cloth and put it into the soap head and brush it the oil stain on the inner wall. The grooves at the four corners of the pp sink can be brushed with some fine salt particles from the waste toothbrush.