A full range of laboratory fixtures and fittings will be required to create a working lab and give staff all the tools they need to carry out industrial processes.

Special Fittings:
More specialised equipment will be required by particular types of industrial lab, depending on the type of process which is being carried out in the area. These include:

Gas Proving Systems – Where a gas supply is present, these systems are essential. They need to be installed as part of the works to supply items such as Bunsen burners or specialist equipment. Proving systems are used to pressure-test the pipework and fitting. Should a drop in pressure be found, either from leaking pipework or an open gas tap, they will not allow gas to pass through until integrity is regained.
Specialist Gases and Water Supplies – These can include compressed air or a vacuum and specialist water and gas supplies. Tecomak Furniture Solutions can fit the required lab taps or outlets, and they will be connected and plumbed by specialist installers.
Fume Cupboards or Safety Cabinets – Labs may need various different types of cabinet to give protection to both staff and production. We can supply and install these cabinets, with or without associated ductwork. Any fume cupboard should be integrated into the overall lab design, for reasons of both efficiency and safety.
Emergency Shower Stations and Mains Supplied Eyewash Stations – These are needed to protect staff in industrial labs where some types of hazardous substance are being handled. We can supply and install either hand-held or fixed eyewash stations, as well as emergency shower stations.
White boards and AV Equipment: Where a lab needs this type of equipment, it can be sourced and supplied as required.

In a laboratory, people are in need of different items of use. Some may need faucets pr otherwise some may even need various ss stools so that they may be able to sit comfortably and perform their experiments. They are called various apparatuses.

Laboratory water faucets are thus one of these items which one must use necessarily. They are helpful in regulating the amount of water one needs or does not need to use. These laboratory water faucets are helpful when you have to check the amount of water that is eithesr sent or sent out in any research setup.

Laboratory faucets must be made out of good material so that the water is well regulated. It has to be sturdy so that things do not come out and water is well regulated. Water faucets are used and are useful in all kinds of scientific experiments. Thus, one must make sure that they have Laboratory water faucets fitted which regulates the flow of water appropriately.

Mixing Faucets
Cold Water Faucets
Foot Operated Faucet
DI/RO Faucet

Lab gas faucets and lab taps are specifically designed to meet the rigorous demands of the lab environment. Lab gas faucets may be used for any laboratory gas. It is important to ensure that these lab gas faucets are tested and certificated for gas services. Again checking with your in lab technician or expert for the right attributes is very important to ensure safety standards before purchasing the lab gas faucets and installation. Engineering information is further important to select the best lab gas faucet manufacturer in the market. Thus, it is advised to ensure all quality checks before purchase.