1. Excellent features: It adopts electric heater heating method, which is suitable for use in areas where the temperature is lower than 0 degrees, and can effectively increase the temperature of eyewash outlet water by about 15 degrees.
2. Material: The main body is 304 stainless steel, and the national standard thread of the pipe fitting interface.
3. Shower: Push the push plate away, and the shower water will spray out from the shower basin within 1 second, and the shower flow rate is 120-180L/MIN. Working pressure 0.25-0.4MPA.
4. Eyewash: working pressure 0.25-0.6MPA. Push the push handle, and the aerosol Anti-freeze Emergency Shower and Eye Wash Station will be sprayed out within 1 second. The water outlet height and angle are designed according to the proportion of the human face, and the eyewash flow rate is 12-18L/min.
5. The TPU plastic water spray cover is equipped with an integrated dust cover, which is non-toxic and harmless to prevent secondary damage and will not be lost.
6. Shower basin: The design of the rotating spray device ensures that the shower effect is at a height of 1524mm, and the spray diameter of the shower is 508mm. Anti-freeze Emergency Shower and Eye Wash Station washbasin: 1mm thick straight side basin, punched and formed by rotating mold for many times, curled edge design, no burr, high polishing brightness, exquisite and durable.
7. Water Heater Emergency Safety Shower filter: high-density PP+304 double-layer filter, which can filter impurities in the water, and the sprayed water is aerosol, hugging and gentle.
8. Flow adjustment: There is a flow regulator at the front end of the eyewash nozzle, which can manually adjust the water flow according to the on-site water source pressure. The flow of the two nozzles can be adjusted independently, which effectively solves the problem that the traditional Anti-freeze Emergency Shower and Eye Wash Station is prone to inconsistent water flow and cannot be corrected.
9. Ball valve: The two-piece ball valve can make the water flow of the Anti-freeze Emergency Shower and Eye Wash Station device meet the American standard. Under the standard water pressure of 0.25MPa, the two-piece ball valve makes the flow rate of the shower reach 120-180L/min, which meets the American standard; the one-piece valve can only reach 66L/min.
10. Water Heater Emergency Safety Shower assembly: 304 casting parts are finished and composed, of which the 90-degree elbow is made of seamless pipe without welds, and the pipe wall will not burst due to water pressure during use.
11. Base: 304 stainless steel die-casting, high strength and pressure resistance.
12. Water inlet and outlet: standard size 5/4 inch threaded connection. Can be customized upon request.
13. Heating device: The electric heating device is equipped with a temperature control switch or a fully automatic system to control the heating temperature or start the switch. High-power heater power: 10KW, or design power according to demand.
15. Electric heating voltage: AC380V current 25A
16. Explosion-proof grade: Exd II BT4. Protection class: IP54. (configurable upon request)
17. Configure the pedals. Delivery of self-luminous luminous safety signs.
19. Empty anti-freezing device: The eyewash system has an automatic emptying device to prevent the pipeline from freezing.
20. Performance: It has good performance against corrosive solutions such as acid, alkali, salt and oil.
21. Function: It is used in petroleum, chemical, beverage, pharmaceutical and other industries. When chemical liquids, toxic and harmful substances, and fires are splashed on the body, face, and eyes of the staff, they are quickly rinsed to reduce the degree of harm.
22. Standard: Comply with the American ANSIZ358.1.2009 standard.
Specification
Name |
Color |
Power supply |
Explosion-proof class |
Protection class |
Overall power |
Product dimensions (L×W×H/cm) |
Package dimensions (L×W×H/cm) |
Water inlet |
Water outlet |
Model |
Explosion-proof electric heating emergency eyewash shower |
green |
220V AC 1PH 50HZ |
Exd IICT6 |
IP65 |
200W |
45×90×245 |
255×85×38 |
R 1-1/4 External Screw pattern |
WJH0658 |
1. Introduction
The electric heating shower composite eyewash is a modern safety equipment designed to provide quick and effective eye and face wash for emergency use. It combines the features of a shower and an eyewash in a single unit, and provides an all-in-one solution for emergency eye and face wash that is not only convenient for users but also safe and effective. This article will discuss the features, advantages and disadvantages of electric heating shower composite eyewash, as well as its applications in the workplace.
2. Features
The electric heating shower composite eyewash is a combination of a shower and an eyewash. It consists of a shower head with an integrated eyewash, which is activated by a lever. The shower head can be adjusted to different heights, depending on the user’s preference. The eyewash is designed to provide a steady stream of clean, potable water to the eyes and face. The shower head is designed to provide a gentle spray of water that is slightly warmer than the ambient temperature, providing a soothing effect while washing away foreign materials from the eyes and face.
3. Advantages
The electric heating shower composite eyewash offers several advantages over traditional eyewash and showers. Firstly, it is easy to install and maintain, as it is a single unit with no additional parts or components required. Secondly, it is more hygienic than traditional eyewash, as the water is heated and filtered before it enters the user’s eyes and face. Thirdly, it is a much quicker and easier way to provide emergency eye and face wash, as it can be activated with one hand and does not require any additional setup or preparation. Finally, it is a cost-effective solution, as it is cheaper than purchasing separate eyewash and shower units.
4. Disadvantages
Although the electric heating shower composite eyewash offers several advantages, there are also some potential drawbacks. Firstly, it is not suitable for extremely hazardous environments, as the water is not as strong as a traditional eyewash and may not be sufficient to remove hazardous materials. Secondly, the water temperature is not adjustable, so it is not suitable for users with sensitive skin. Finally, it is more expensive than a traditional eyewash, so it may not be a viable option for those on a tight budget.
5. Applications
The electric heating shower composite eyewash is suitable for a wide range of applications in the workplace. It is particularly useful in areas where hazardous materials are present, as it provides a quick and effective way to wash away foreign materials from the eyes and face. It is also ideal for areas where there is a risk of splashing water, as the shower head can be adjusted to different heights to ensure that the user is kept safe from any potential hazards. In addition, it is a great option for emergency first aid, as it is easy to use and does not require any additional setup or preparation.
6. Conclusion
The electric heating shower composite eyewash is a modern safety equipment designed to provide quick and effective eye and face wash for emergency use. It combines the features of a shower and an eyewash in a single unit and provides an all-in-one solution for emergency eye and face wash. It is easy to install and maintain, and is more hygienic and cost-effective than traditional eyewash and showers. It is suitable for a wide range of applications in the workplace, and is ideal for areas where hazardous materials are present.