First, install the base section to secure the desktop. Unscrew the lock nut and gasket and place the base into the opening with a hole size of 35mm.
Then, the gasket and the lock nut are fixed, and the high-pressure water pipe on the table top is penetrated from the bottom to the top. Placed in the sink, the main body is connected to a pipeline filter to filter impurities. Prevent sand particles from entering the pipe and causing damage to the valve plug. Then, it is connected with the main body of the water nozzle, and the direction of the triple water nozzle is adjusted after the connection. In order to prevent the water nozzle from rotating left and right, a hexagonal top wire is arranged on both sides of the base portion, and a hexagonal wrench is used for fixing. After the fixing is completed, the lock nut on the main body and the base thread are tightened, and the product is installed.