Enclosed Emergency Showers & Eyewash Rooms
Introduction
The Occupational Safety and Health Administration (OSHA) requires employers to provide emergency safety showers and eyewash stations to protect workers from hazardous chemicals and other hazardous materials. Emergency showers and eyewash rooms should be easily accessible and in close proximity to any areas that may be affected by hazardous materials. The objective of this guidance document is to provide employers with information on how to design, install, and maintain enclosed emergency showers and eyewash rooms to meet OSHA requirements.
Emergency Showers
Emergency showers are designed to provide immediate protection for employees who have been exposed to hazardous chemicals. They are intended to be used for rapid and complete flushing of the entire body with a large volume of water. OSHA requires employers to provide an emergency shower in any area where hazardous materials are stored or used.
Location
Emergency showers must be located in areas that are easily accessible and in close proximity to any areas where hazardous materials are present. OSHA requires that shower locations be no more than 10 seconds away from the hazard area. This is measured by walking at an average walking speed of 4.5 feet per second.
Design
OSHA requires that Enclosed Emergency Showers & eyewash room be designed to provide a minimum of 20 gallons of water per minute at a temperature between 60°F and 100°F. The shower should be equipped with a pull valve that can be easily activated with one hand to start the flow of water. A sign should be posted next to the shower that states “Emergency Shower.”
Emergency showers must be installed according to the manufacturer’s instructions. The shower should be installed on a level surface that is not slippery. The shower should be connected to a hot water supply and a cold water supply, and it should be equipped with a mixing valve to maintain the water temperature.
Maintenance
Emergency showers must be maintained in accordance with the manufacturer’s instructions. The shower should be inspected on a regular basis for any signs of damage or deterioration. The shower should be cleaned and disinfected at least once a year. The water temperature should be tested periodically to make sure it is within the required range.
Eyewash Rooms
Enclosed Emergency Showers & eyewash room are designed to provide immediate protection for employees who have been exposed to hazardous chemicals. They are intended to be used for rapid and complete flushing of the eyes with a large volume of water. OSHA requires employers to provide an eyewash room in any area where hazardous materials are stored or used.
Location
Enclosed Emergency Showers & eyewash room must be located in areas that are easily accessible and in close proximity to any areas where hazardous materials are present. OSHA requires that eyewash room locations be no more than 10 seconds away from the hazard area. This is measured by walking at an average walking speed of 4.5 feet per second.
Design
OSHA requires that eyewash rooms be designed to provide a minimum of 0.4 gallons of water per minute at a temperature between 60°F and 100°F. The eyewash should be equipped with a pull valve that can be easily activated with one hand to start the flow of water. A sign should be posted next to the eyewash that states “Eyewash Room.”
Installation
Eyewash rooms must be installed according to the manufacturer’s instructions. The eyewash should be installed on a level surface that is not slippery. The eyewash should be connected to a hot water supply and a cold water supply, and it should be equipped with a mixing valve to maintain the water temperature.
Maintenance
Eyewash rooms must be maintained in accordance with the manufacturer’s instructions. The eyewash should be inspected on a regular basis for any signs of damage or deterioration. The eyewash should be cleaned and disinfected at least once a year. The water temperature should be tested periodically to make sure it is within the required range.
Conclusion
Enclosed Emergency Showers & eye are essential components of any safety program. OSHA requires employers to provide emergency showers and eyewash rooms that are easily accessible and in close proximity to any areas that may be affected by hazardous materials. Employers must design, install and maintain these facilities according to OSHA regulations in order to ensure the safety of their employees.
*Customized performance: There is a water flow temperature indicator at the water inlet and outlet. When the water inlet temperature is lower than zero, the eyewash body will automatically turn on the heating function to eliminate the unusable or damage caused by the temperature being too low. Strong resistance to acid, alkali, salt, oil and other chemicals.
Scope of use: suitable for nuclear energy, petroleum, chemical industry, machinery manufacturing, automobile ship repairing, casting, painting, printing and dyeing, medicine, medical treatment and other industries
*Using environment: suitable for use in cold climate areas
*Optional configuration: pedals can be added, ABS coating and lighting device can be added, anti-freezing device can be added, eyewash can be customized according to customer requirements.